ITEM# 11210603B
SIZE: 21L X 29.7H(CM)
11210603V
ENTERTAINMENTCENTER
STEP 2:
ATTACH SHORT TUBES ( 2 ) AND SHORT ENGROVE TUBES ( 4 )
TO INSERT CAP ( 5 ) AS SHOWN.
STEP 3:
SLIDE UPPER BACK PANEL ( D ) INTO THE GROOVES OF
SHORT ENGROVE TUBES ( 4 ) AS SHOWN.
PARTS
2
4
5
6
10
Do you have any questions ? Missing small parts or hardware?
If you need assistance with the assembly of your
ENTERTAINMENTCENTER please e-mail our Customer Service
Department at:
or call us at (508) 435-4830
or (800) 639-3803
Please include the following information in your email:
• Where item was purchased
• Item, model, style or SKU number listed on instructions
or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
This unit is intended for use only with the
products and maximum weights indicated. Use
with other products or products heavier than the
maximum weights indicated may result in
instability causing possible injury. Furniture can
tip over or break if improperly moved. Have a
friend help to lift and carry the unit to it's new
location.
FDS
11210603B
ENTERTAINMENTCENTER
Doris
Josh
2008
01/31
ITEM DESCRIPTION
ITEM NO.
DESIGNER
MDSER
CUSTOMER
DATE
A/W NO.
This proprietary artwork and concepts are copyright designs of Fourstar Group Inc. 2007. No part of this artwork may be
reproduced or transmitted in any form without express written consent. © Fourstar Group Inc. All Rights Reserved.
4 SHORT ENGROVE TUBE - 2 PCS
2 SHORT TUBE - 2 PCS
5 INSERT CAP - 4 PCS
3
PARTS LIST
UPPER BACK PANEL
D
TOP PANEL
SHELF PANEL
BOTTOM PANEL
C
B
NO
A
1 pc
1 pc
QTY
1 pc
E
BOTTOM BACK PANEL
1 pc
1 pc
STEP 4:
ATTACH SHELF PANEL ( B ) TO ASSEMBLED FROM STEP 3
USING LONG TUBES ( 1 ) AND LONG ENGROVE TUBES ( 3 )
A SHOWN.
7
3 LONG ENGROVE TUBE - 2 PCS
1 LONG TUBE - 2 PCS
STEP 5:
SLIDE BOTTOM BACK PANEL ( E ) INTO THE GROOVES OF
LONG ENGROVE TUBES ( 3 ) AS SHOWN.
8
STEP 6:
ATTACH BACK PANEL ( C ) TO ASSEMBLED SECTION FROM
STEP 5 USING LEGS ( 6 ) AND NO-TIP FEET (7) AS SHOWN.
135 lbs
75 lbs
9
6 LEG - 2 PCS
HARDWARE LIST
SHORT
ENGROVE TUBE
4
LONG TUBE
SHORT TUBE
LONG
ENGROVE TUBE
3
2
NO
1
2 pcs
2 pcs
QTY
2 pcs
5
INSERT CAP
4 pcs
6
LEG
7
NO-TIP FEET
2 pcs
2 pcs
2 pcs
7 NO-TIP FEET - 2 PCS
A
UNFINISHED
SURFACE
5
5
5
5
2
2
4
4
5
A
UNFINISHED
SURFACE
1
1
3
3
UNFINISHED
SURFACE
A
3
E
FINISHED
SURFACE
UNFINISHED
SURFACE
E
B
4
D
UNFINISHED
SURFACE
A
D
FINISHED
SURFACE
A
B
C
D
E
6
6
7
7
RUBBER MALLET
BEFORE YOU BEGIN,
PLEASE READ ASSEMBLY INSTRUCTIONS CAREFULLY.
FOLLOW THEM STEP BY STEP.
OPTIONAL ASSEMBLY TOOL
CAUTION :
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY INSTRUCTIONS
STEP 1
PRESS INSERT CAPS ( 5 ) INTO TOP PANEL ( A ) AS SHOWN.
INSERT CAP
INSERT CAP
USING EITHER A SOFT RUBBER MALLET OR BY FIRMLY PRESSING THE
INSERT CAPS INTO THE TOP PANEL USING THE FLAT SIDE OF A BOOK OR
OTHER HARD FLAT SUREFACE TO PRESS THE CAPS INTO THE PANEL.
75 lbs
UNFINISH
SURFACE
C
V
Содержание 11210603V
Страница 1: ...11210603V ENTERTAINMENTCENTER V...
