Date: 2017-06-28
PPA DSP amplifier user manual
29
11.4.
Crossover Tab
Activate the crossover tab and select the crossover type
FIR with speaker compensation
.
The target SPL of 100 dB and the latency of 10ms are ok for this example.
In the
curves
section select the measurements for Output one and two. For this example we are using a
crossover frequency of 400 Hz .
Next, the crossover parameters for LF/MF crossover between output channel 1 and the satellite channels 2
and 3 (Figure 18) are set.
Figure 16 Measurement Curves