User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 18 of 40
Add
：
J1-J3,3
rd
Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http
：
//www.fourfaith.com Tel
：
+86 592-6300326 6300325 6300324 Fax
：
+86 592-5912735
This function is used to detect whether the Internet connection is active, if you set it and when
the router detect the connection is inactive ,it will redial to you ISP immediately to make the
connection active.
Detection Method:
None: do not set this function
Ping: Send ping packet to detect the connection, when choose this method, you should also
configure "Detection Interval", "Primary Detection Server IP" and "Backup Detection
Server IP" items.
Route: Detect connection with route method, when choose this method, you should also
configure "Detection Interval", "Primary Detection Server IP" and "Backup Detection
Server IP" items.
PPP: Detect connection with PPP method, when choose this method, you should also configure
"Detection Interval" item.
Detection Interval: The time interval between two detections, unit is second
Primary Detection Server IP: The server used to response the router’s detection packet. This item
is only valid for method "Ping" and "Route".
Backup Detection Server IP: The server used to response the router’s detection packet. This item
is valid for method "Ping" and "Route".
Note: When you choose the “Route” or “Ping” method, it’s quite important to make sure that the
“Primary Detection Server IP” and “Backup Detection Server IP” are usable and stable, because
they have to response the detection packet frequently.
3.3.3 WIFI Settings
WIFI enable
Wifi Enable: Enable or disable WIFI function.
Wireless Network
