F2X14-E Series IP Modem User manual
Page 23 of 34
Fax
：
0592-5912735
Tel
：
0592-6300320
Xiamen Four-Faith Smart Power Technology Co.,Ltd
.
Add
：
Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen.China
Hotline
：
400-8838-199
For concurrent mode, datas will be sent to all the centers according to the number of
configuration centers.
3.2.9 “Other configuration”
Maximum number of login: Default 10.
Remote telnet or not
：
Default NO.
Debug mode or not: Yes or No (Chose “Yes”, you can see the run logs through the
serial port tool),This parameter takes effect immediately upon completion of configuration.
3.2.10 “ Related settings of network management platform”
Serial No.:A king of number that the gateway platform can identify the device, 15-bit
string( Factory defined, can not be modified)
。
Working mode: Only SMS mode, SMS plus IP mode or disabled.
List of trust Numbers: Only receive user SMS of trust list, if the list is empty, SMS from
any user can be accepted.
Device number: Device identification of gateway platform(Factory defined, can not be
modified).
Gateway platform address: IP address and port number of gateway platform.
Gateway platform heartbeat interval (seconds): Heartbeat interval of gateway platform,
range: 30~600
。
3.2.11 “Administrator login Settings”
Administrator login account
：
Administrator Name Settings for administrator.
Administrator login password: Administrator password Settings.
Ordinary user login account: Name Settings for ordinary users.
Ordinary user login password: Password Settings for ordinary users.
3.2.12 “ICMP parameter setting”
ICMP detection of the host: Check whether the PPP connection is normal or not, fill in
the IP address.
ICMP maximum number of lost packets: Redialing if no network packets were received
after sending ICMP several times.
Network spare interval (seconds): Send the ICMP probe package after that time no
network packets have been received. Input range: 30~3600.
3.2.13 “User-defined UDP frame format”
UDP frame type: ASCII type or HEX type, ASCII type use ASCII character , HEX type
use HEX character
。
UDP login frame: For the enterprise gateway connection mode is pure UDP.
UDP login response frame: For the enterprise gateway connection mode is pure UDP.
