Fountaine Pajot Helia 44 2019, Руководство пользователя

Страница: 10 / 34

OWNER’S MANUAL / HÉLIA 44
OWNER’S MANUAL / HÉLIA 44
19 18
MOORING AND TOWING
Start the starboard engine.
Raise the anchor to the bridle snap hook and undo the snap hook from the
bridle.
When raising, check that the chain enters the well properly in order to avoid
the chain blocking.
Raise the anchorage slowly, checking that the anchor is placed correctly in its
davit.
When the anchor is close to the davit, check that the tip moves into the roller
in the right direction.
Block the chain by pulling hard on the security hoist: this will jam the anchor
on the davit and prevent it to damage davit or hulls.
Clamp the hoist to avoid the anchor moving on the davit.
1
2
3
4
5
6
7
Raising the anchor
During the operation, stay away from the windlass and the chain and
make sure that you protect your hands and feet.
Keep an eye whilst rising the chain in order to not damage the hull.
WARNING
For mooring, the anchor points are the 6 cleats (a) :
- 2 x front
- 2 x middle
- 2 x aft
a
V
Mooring cleats
The cleats have a resistance of around 6000kg. They are designed for a Ø18 polya-
mide rope.
For towing, use the 2 front cleats to attach a Ø18 polyamide rope like a snap rope.
ANCHORAGE (NEXT)
Sailing
2
If the force required by the windlass is too important, the breaker is
triggered. Reset it to restart the windlass (accessible in the starboard
engine compartment).
WARNING
a
a
a
a
a
a