December 2008
© 2008 Foundry Networks, Inc.
1-1
Chapter 1
Getting Started
Introduction
This guide describes the NetIron MLX router from Foundry Networks. It provides procedures for installing modules
into the NetIron MLX Series chassis, cabling the Ethernet interface ports, and performing a basic configuration of
the software. This guide also explains how to perform tasks using the command line interface (CLI).
Audience
This guide is designed for network installers, system administrators, and resellers who will install and perform a
basic software configuration for the NetIron MLX Series router. This guide assumes a working knowledge of Layer
2 and Layer 3 switching and routing concepts.
Nomenclature
This guide uses the following typographical conventions to show information:
Italic
highlights the title of another publication and occasionally emphasizes a word or phrase.
Bold
highlights a CLI command.
Bold Italic
highlights a term that is being defined.
NOTE:
A note emphasizes an important fact or calls your attention to a dependency.
WARNING:
A warning calls your attention to a possible hazard that can cause injury or death.
CAUTION:
A caution calls your attention to a possible hazard that can damage equipment.
Updates to Manuals
Manuals for this product may be updated between releases. For the latest edition of manuals, check the Foundry
Knowledge Portal at kp.foundrynet.com.
