1
GUARD RAIL
9524
SI642H
YY
Allenhead Bolts
NOTE: These bolts came with your crib. Refer to crib assembly instruction manual under section
the attached instructions and diagrams while assembling the guard rail.
ASSEMBLY DIRECTIONS AND PARTS LIST
BEFORE STARTING THE ASSEMBLY PROCEDURE, READ ALL DIRECTIONS WITH CARE.
A
(2)
Allen Wrench
PARTS ENCLOSED IN METRIC HARDWARE BAG
(4)
Joint Connector Nut
C
Division of Foundations
®
Worldwide, Inc.
• 5216 Portside Dr., Medina, OH 44256 USA • PH: 1 330.722.5033 • FAX: 1 330.722.5037
www.childcraftbaby.com
(4)
Allenhead Bolts
B
This model contains both metric and imperial hardware.
Read carefully before proceeding.
WARNING
The enclosed hardware contains (2) types of Allen Head Bolts (B) and Joint Connector Nut (C). The
crib models listed below will use the imperial thread (1/4-20) type. All other models will use a metric
date of manufacturer before proceeding to establish which hardware type is designed for your crib.
This information will be printed on a label attached to your crib. Once the model number and date of
manufacturer is established, refer to the following list. If your model number is listed below, or if your
crib was manufactured before January 1, 2012, use the hardware contained in the bag which has the
printed warning on that bag. All other models will use the second metric type. Also use the enclosed
Allen Wrenches (A) with either version. Discard the second set of (B) and (C) which is not used.
Core Crib Model Number Finish Color Code
F10031.XX XX will be any number from 00 to 99
Cribs designed for this guard rail manufactured before 01-01-2012
IMPERIAL THREAD (1/4-20)
PARTS ENCLOSED IN IMPERIAL THREAD HARDWARE BAG
METRIC (6 mm)
METRIC (6 mm)
(4)
Joint Connector Nut
C
(4)
Allenhead Bolts
B
IMPERIAL THREAD (1/4-20)
ITEMS THAT CAME WITH YOUR CRIB
