Foster 7330240, Руководство пользователя, Страница: 27 / 136

27
Starting-up

Start up / switch off the hob:
Action Control panel Display
To start press key [ 0/I ] [ 0 ] are blinking
To stop press key [ 0/I ] nothing or [ H ]

Start up / switch off a heating zone:
Action Control panel Display
Zone selection press display [ 0 ] selected [ 0 ] and control light on
To set slide on
the “SLIDER“
[ 0 ] to [ 9 ]
(adjust the power) to the right or to the left
To stop
slide to [ 0 ] on “SLIDER“
[ 0 ] or [ H ]
or press on [ 0 ] [ 0 ] or [ H ]
If no action is made within 20 second the electronics returns in waiting position.
Pan detection
The pan detection ensures a perfect safety.
The induction doesn’t work:

If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.

If the pan is removed from the heating zone the operation is stopped. The display shows [ U ].
The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking
continues with the power level set before.
After use, switch the heat element off: don’t let the pan detection [ U ] active.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any
heat sensitive object on them.
There are risks of burn and fire.
Booster function
The booster function [ B ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high power.
The booster is foreseen for example to heat up rapidly big quantities of water, like to cook
noodles.

Start up / Stop the booster function:
Action Control panel Display Zone
Zone selection press key [ 0 ] from the zone [ 0 ] and control light on
Start up the booster press key [ B ] [ P ]
Stop the booster slid
e on the “SLIDER“
[ P ] to [ 0 ]
or press on [ B ] [ 9 ]