Retro Digital
Time Mode
1. Press C to toggle T1/T2 time zones.
2. Press and hold C to select default time zone display.
3. Press A for EL.
4. Press D for chime ON/OFF.
5. Press B to view other watch menus.
Time Setting
1. Press and hold A to enter time setting mode.
2. Press B to proceed to the next setting field.
3. Press C or D to change setting field value.
4. Setting sequence will be as follows: Auto EL, Chime ON/OFF, Time Format (12H/24H), Hour, Minute, Second, Year, Date Format (M-D/D-M),
Month, Day.
5. Press and hold C or D to advance quickly.
6. Press A to exit setting mode.
Time Zone 2 Setting
1. When time zone 2 is the default display, press and hold A to enter time setting mode.
2. The time difference between T1 and T2 may be set by pressing C or D buttons.
3. Time difference range is ±23 hours.
4. Press A to exit setting mode.
5. If no pushers are operated for 30 seconds, setting will be returned to normal time display.
Chronograph Mode
1. Press C to start/stop the chronograph.
2. Press D to split and/or reset chronograph.
3. The CHR icon will appear every time in chronograph mode.
4. The CHR icon will flash every time chronograph is running. (This will be the case even in other watch modes.)
5. At chronograph STOP state, press A to access memory recall.
Memory Recall
1. At recall mode, press A to view the next lap.
2. Press C or D buttons to exit recall mode and go back to chronograph mode.
3. There are a total of 10 lap memories. The lap number will be replaced by “L” if the total number of laps is greater than 9.
4. The last lap memory will be overwritten by the latest lap while the first 9 laps will remain unchanged.
5. If no pushers are operated for 30 seconds, setting will be returned to normal time display.
Timer Mode
1. Press C to start and stop timer.
2. Press D to reset counter to preset value.
3. Press and hold A to enter timer setting mode.
Timer Setting
1. Press B to select hour, minute, second, or timer type.
*Timer types are:
CD-STP (Countdown-Stop)
CD-REP (Countdown-Repeat)
CD-UP (Countdown-Count up)
2. Press C to increase the digit. Press D to decrease the digit.
3. Timer alarm sound will be 2 beeps per second.
4. Timer alarm will go on for 30 seconds at CD-STP.
5. If Timer preset value is less than 1 minute at CD-REP mode, alarm sound will go on for 1 second at zero time.
6. Timer will be stopped automatically with 30 second beep sound when the repetitions reach 100 at CD-REP.
7. At CD-UP, timer will be stopped and reset with 30 second alarm sound when counter reaches 23h59m59s.
Alarm Mode
1. Press C to scroll through alarms.
2. Press D to enable/disable alarm.
3. Press B to proceed to real time mode display.
Alarm Setting
1. Press and hold A to enter alarm setting mode.
2. Press B to select hour and minute.
3. Press C to increase the digit. Press D to decrease the digit.
4. Press A to exit setting mode.
5. If no pushers are operated for 30 seconds, setting will be returned to normal time display.
6. Alarm sound will go on for 30 seconds at a rate of 4 beeps per second.
7. Alarms will be enabled automatically once setting mode is accessed.
B
A
D
C
SET/EL
MODE
START/STOP
LAP/RESET
