- 2 -
1 2
B
C
A
ANALOG - DIGITAL
Ana-Digi FL1331A
Normal Time Display
1. Press A or B for EL.
2. Press and hold A or B for 2 seconds to turn digital display off. Press any pusher to turn on the
display when it is off.
3. Press C to toggle 12/24-hour format. Display will show “AM” or “PM” for 12-hour format.
4. Press D to change mode. Mode sequence is time, date, chronograph, alarm.
NOTE: In any setting mode, if no pusher is operated for 30 seconds, all changes will be saved
and the setting will automatically return to display mode.
Time and Calendar Setting
1. In normal time display or calendar display, press and hold C for 2 seconds, year will begin
flashing.
2. Press D to advance digits; press and hold D for fast advance.
3. Press C to advance to next setting value.
4. Setting sequence is: year, month, date, hour, minute, seconds.
5. Press C to exit setting mode.
NOTE: Weekday will automatically update upon exiting setting mode.
Chronograph Mode
1. Press D to change to chronograph mode.
2. Press D and hold 2 seconds to reset chronograph to zero.
3. Press C to start/stop the chronograph.
4. Press D to reset to zero.
Alarm Mode
1. Press D to change to alarm mode.
2. Press C to toggle alarm/chime on/off.
3. Alarm will sound at preset time for 20 seconds; press any pusher to silence alarm.
Alarm Setting
1. In alarm mode, press and hold C for 3 seconds; hour will begin flashing.
2. Press D to advance digit; press and hold D for fast advance.
3. Press C to set and advance to minute.
4. Press D to advance digit; press and hold D for fast advance.
5. Press C to exit setting mode.
C
D
B
A
DATE
MONTH
24-HOUR HAND
WEEKDAY
Automatic 2876
1. To start time-keeping, rotate the crown clockwise 15-20 times in position 1.
2. Pull crown out to position 2 and rotate clockwise to set hour and minute hands. 24-hour hand
moves with hour and minute hands. Use 24-hour hand to set correct am/pm time. Push crown
back to position 1.
3. Press A to adjust weekday. Each press of pusher A will advance the weekday by one increment.
4. Press B to adjust month. Each press of pusher B will advance the month by one increment.
5. Press C to adjust date. Each press of pusher A will advance the date by one increment.
NOTE: Do not set date between 10 p.m. and 2 a.m. (22 o’clock and 2 o’clock). Doing so
could damage the movement’s accuracy.
Automatic TY2714
1. To start time-keeping, rotate the crown clockwise in position 1 until power reserve hand
moves from “-” (low reserve) to “+” (full reserve).
2. Pull crown out to position 2 and rotate to set time. Return crown to position 1.
3. Press A to set date. Each press of pusher A will advance the date by one increment.
NOTE: Do not set date and week between 10 p.m. and 4 a.m. (22 o’clock and 4 o’clock).
Doing so could damage the movement’s accuracy.
1 2
A
DATE
MINUTE HAND
SECOND HAND
HOUR HAND
POWER RESERVE