Foscam FN7108W-B4, Руководство пользователя

Страница: 8 / 67

NVR User Manual
www.foscam.com 1
1
Overview
1.1
Product Introduction
The series of product is a NVR Kit. This advanced product series receives a high quality video stream
that is transmitted digitally by the IP Camera (IPC). The product can perform live video preview,
recording, playback, remote access, and backup simultaneously.
1.2 Key Features
Network Monitoring
You can access the NVR system remotely through the Video Management System (VMS) and Foscam
APP, or access the NVR system locally by using the display or monitor.
Multi-screen Preview
Multi-screen preview indicates that several pages are displayed on the screen of the monitor based on
the same scale.
Recording
The NVR supports recording and storing video files on a Hard Disk Drive (HDD). Stored videos files can
be queried or played back through local GUI.
Recording can be classified into schedule recording, manual recording, and alarm recording from low
priority to high priority. If recording of any two types is enabled at the same time, only the recording of a
higher priority takes effect.

Manual recording
You can manual enable recording in the corresponding channel.
 Schedule recording
You can select the scheduled time segment to enable or disable recording.

Motion detect recording
After the motion detect is enabled and recording is selected, motion detect recording is enabled
when motion detection is triggered in the detection time segment and detection area.
 Alarm recording