NVR User Manual
www.foscam.com
4
1.5 Common Operations
Starting Up the NVR
Turn on the power switch on the rear panel. The Power indicator LED should turn green indicating
that the device begins to start up.
Note
If the power LED indicator on the front panel is off, please check if the power supply is plugged into
an electrical outlet and the power switch is turned on;
Shutting Down the NVR
There are two proper ways to shut down the NVR in the GUI interface.
After login, right-click the mouse, you can click Shutdown in the shortcut menu.
Choose
Menu > System
in the Menu interface, then click
Shutdown
in the System interface.
Then turn off the power switch on the rear panel, the power LED indicator on the front panel turns
off.
Reset
You can reset the NVR device to restore the factory settings. You can choose any one of the
following methods operate.
Reset button: Press and hold it for 3 seconds to reset all parameters to factory defaults on the
bottom of the NVR.
Local GUI: Choose
Menu > System
in the Menu interface, then click
Factory Reset
in the System
interface.
Web GUI: Choose
(Parameter Configuration) > System Management > Factory Reset
.
The
Factory Reset
page is displayed.
