Menu Setting
Technical Specification
Rotate the Funciton key to select the mode and parameter, the LCD will change.
Press the Function key to enter the menu, the LCD will change.
1. Voltage: AC200~250V, 50HZ/60HZ, Fuse 3A/250V
2. Rated Power: 150W
3. Scanner: 50K High-speed optical scanner, ±30° big angle scanning
4. Laser: RGB analog modulate, 10KHZ frequency
3000mW 638nm wavelength red laser, TE-cooled
3000mW 520nm wavelength green laser, TE-cooled
4000mW 450nm wavelength blue laser, TE-cooled
5. Working Modes: BEYONG/QS, ILDA Input, DMX-512, Art NET, Auto Start
6. Graphics & Effects: Beam show and animated graphics show patterns
7. SD card: 8GB, build in program, and downloading program
8. Play Program Format: .FB4 laser show document downloading for BEYOND/QSS
9. Safety Configure: Laser key switch, laser remote interlock, safety shutter,
SFS Control(scanner fail safety control ON/OFF), flying rings bolt
10. Interface: 5 pins XLR jack for DMX, DB25/M interface for PC control
DB25/M interface for PC control
RJ45 Ethernet interface for BEYONG/QS
11. Machine Size: 410*300*235(H)mm
12. Machine Weight: 22.6Kg
Front/Rear Panel
Front/Rear Panel
Note: xxx Mode is Test Mode or Auto Start
Front Panel
1. Laser indicator: White
2. Laser aperture
3. Fan air outlet
Page 8
Page 5
Operation Mode
xxx Mode
Geo Correction
Master Settings
Color Settings
Scan Guard
FB4 Device Infor
Exit Menu
Submenu See
Table 1
Submenu See
Table 2
Submenu See
Table 3
Submenu See
Table 4
Submenu See
Table 5
Submenu See
Table 6
Submenu See
Table 7
1
2
3
