1080 Centre Rd, Suite C
Auburn Hills, MI 48326
www.fortrezz.com
Phone: (248) 481-7092
Made in USA
081613
FCC Compliance Statement Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may
cause undesired operation.
Contains Transmitter Module FCC ID: XCT-Z3US
FCC Warning (Part 15.21).
Changes or modifications not expressly approved by the party responsible for compliance could vo
id he user’s
authority to operate the equipment.
FCC Interference Statement (Part 15.105 (b))
. This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To satisfy FCC RF Exposure requirements for mobile and base station transmission devices, a separation distance of 20cm or
more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operation at closer than
this distance is not recommended.
Industry Canada Statement per Section 4.0 of RSP-100
The term "
IC:
" before the certification/registration number only signifies that the Industry Canada technical specifications were met.
Section 7.1.5 of RSS-GEN.
Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2)
This device must accept any interference received, including interference that may cause undesired operation.
From section 5.2, RSS-Gen, Issue 2, June 2007 Equipment Labels:
Contains IC: 8156A-Z3X
From section 7.1.1 RSS-Gen, Issue 2, June 2007
a)
The host device, as a stand-alone unit without any separately certified modules, complies with all applicable Radio Standards
Specifications.
b)
The host device and all the separately certified modules it contains jointly meet the RF exposure compliance requirements of
RSS-102AA, if applicable.
c)
The host device complies with the certification labeling requirements of each of the modules it contains.
From section 7.1.6, RSS-Gen, Issue 2, June 2007 Digital Circuits: If the device contains digital circuitry that is not directly associated with the
radio transmitter, the device shall also have to comply with ICES-003, Class A or B as appropriate, except for ICEC-003 labeling requirements.
The test data obtained (for the ICES-003 tests) shall be kept by the manufacturer or importer whose name appears on the equipment label,
and made available to Industry Canada on request, for as long as the model is being marketed in Canada.
Europe
The WWA-02AA module has been certified for use in European countries. Test standard: ETSI EN 300 328 V1.7.1 (2006-10)
The Waste Electrical and Electronic Equipment (WEEE) directive (2002AA/96/EC) was approved by the
European Parliament and the Council of the European Union in 2003. This symbol indicates that this
product contains electrical and electronic equipment that may include batteries, printed circuit boards,
liquid crystal displays or other components that may be subject to local disposal regulations at your
location. Please understand these regulations and dispose of this product in a responsible manner.
Limited Warranty
THE PRODUCT IS PROVIDED WITH ONE YEAR LIMITED MANUFACTURER WARRANTY. FORTREZZ, LLC warrants its
products to be free from defects in material and workmanship under normal use for one year, and is not responsible for
consequential damages or installation costs of any nature. FORTREZZ, LLC. expressly disclaims all implied warranties,
including but not limited to the implied warranties of merchantability and fitness for a particular purpose. FORTREZZ, LLC.
does not warrant, guarantee, or make any representations regarding the use or the results of the use of the products or any
accompanying materials in terms of their correctness, accuracy, reliability or otherwise. In no event shall FORTREZZ, LLC. be
liable to Purchaser hereunder or in respect of any products ordered or delivered to Purchaser, whether in contract, tort
including negligence or otherwise for a loss of profits or loss of use or for any incidental, consequential, special or indirect
damages howsoever caused whether or not FORTREZZ, LLC. has been advised of the possibility of such loss or damage.
FORTREZZ, LLC's maximum liability to Purchaser under these conditions shall in no event exceed the amount paid by
Purchaser for the products that are the subject of the claim and in respect of all claims for products ordered from FORTREZZ,
LLC. to which these conditions apply to the amount paid by Purchaser for the products which are the subject of the claims. If
you are not comfortable with your limited warranty, or not completely satisfied with the WWA-02AA, or the WWA-02AA does
not perform as expected we encourage you to return the WWA-02AA to your DISTRIBUTOR for an exchange or for a full
refund within 30 days of purchase. Or, you can return the WWA-02AA to FORTREZZ with an RGA number.
All products to be returned to FORTREZZ, LLC. must have a valid Returned Goods Authorization (RGA).
Send the returned unit to:
FortrezZ, LLC Warranty Replacement, 1080 Centre Rd. Suite C Auburn Hills Hills, MI 48462,
postage
prepaid with a payment of US$ 9.95 to cover the cost of return shipping, postage and handling. You must use the original packaging
and include a proof of purchase (photocopy of receipt) along with the RGA # and the returned Wireless Water and Freeze Alarm.
