Fortis FSEFBTM520A, Руководство пользователя

Страница: 16 / 20

Appropriate maintenance is required to keep your treadmill in optimal condition. Incorrect
maintenance will damage or shorten the service life of the treadmill.
Regulate the Running Belt
•
The running belt can be adjusted in two variables: the degree of tightness and
central position of the running belt.
•
The running belt has been adjusted when leaving the factory, but it will be
stretched after use. Deviation from a central position can cause damage by
wearing the trim strip and rear protecting cover. It is normal for the belt to stretch
throughout its use.
Adjust the Running Belt
If the running belt is slipping during use or tends to get caught and not run smoothly, adjust
the tightness of the belt. Follow the below instructions:
1. Insert the regulating screw on the back left of running belt using 5 millimeters
hexagon wrench. Turn the wrench by 1/4 of a circle clockwise to regulate the rear
roller to tighten the running belt.
2. Repeat step 1 to adjust the screw on the right. Ensure that the regulating screw is
turned by the same distance to make the rear roller parallel with the frame.
3. Repeat step 1 and 2 until the running belt is tight.
4. If the running belt is too tight, to reduce the tension of the running belt, turn the
wrench anticlockwise by same distance on both sides.
CLEANING & CARE
Note: The running belt should not be too tight as it can damage the running
belt, roller bearing and increase the pressure of front/rear roller causing
abnormal sound or other problems.