Firewall Address
Configuring addresses
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
347
Configuring addresses
You can use one of the following methods to represent hosts in firewall addresses:
IP/Netmask, FQDN, or IPv6.
To add a firewall address
1
Go to
Firewall > Address.
2
Select
Create New
.
If IPv6 Support on GUI is enabled, you can alternatively select the down arrow located
in the
Create New
button, then select
IPv6 Address
to configure an IPv6 firewall
address. For information on enabling configuration of IPv6 firewall addresses in the
web-based manager, see
3
Complete the following:
Figure 207: New address or IP range options
Address / FQDN
The IP address and mask, IP address range, or fully qualified domain name.
Interface
The interface, zone, or virtual domain (VDOM) to which you bind the IP address.
Delete icon
Select to remove the address. The
Delete
icon appears only if a firewall policy
or address group is not currently using the address.
Edit icon
Select to edit the address.
Caution:
Be cautious if employing FQDN firewall addresses. Using a fully qualified domain
name in a firewall policy, while convenient, does present some security risks, because
policy matching then relies on a trusted DNS server. Should the DNS server be
compromised, firewall policies requiring domain name resolution may no longer function
properly.
Note:
By default, IPv6 firewall addresses can be configured only in the CLI. For information
on enabling configuration of IPv6 firewall addresses in the web-based manager, see
Address Name
Enter a name to identify the firewall address. Addresses, address groups, and
virtual IPs must have unique names.
Type
Select the type of address:
Subnet/IP Range
or
FQDN
. You can enter either
an IP range or an IP address with subnet mask.
Subnet / IP
Range
Enter the firewall IP address, followed by a forward slash (/), then subnet
mask, or enter an IP address range separated by a hyphen.
Interface
Select the interface, zone, or virtual domain (VDOM) link to which you want to
bind the IP address. Select
Any
if you want to bind the IP address with the
interface/zone when you create a firewall policy.
Содержание Gate 60D
Страница 678: ...Reports Log Report FortiGate Version 4 0 Administration Guide 678 01 400 89802 20090424 http docs fortinet com Feedback...
Страница 704: ...Index FortiGate Version 4 0 Administration Guide 704 01 400 89802 20090424 http docs fortinet com Feedback...
Страница 705: ...www fortinet com...
Страница 706: ...www fortinet com...
