Fortinet FortiVoice GO08, Руководство администратора

Страница: 50 / 66

Fortinet Technologies Inc. Page 50 FortiVoice Gateway 5.3.6 Administration Guide
4. Click Create .
Mapping a SIP peer with the FortiVoice Gateway
Mapping Rule allows for calls to be made from a SIP peer to the FortiVoice Gateway and then
out on an analog trunk. Likewise, calls can come in on an analog trunk and be answered
through the SIP peer. When creating a mapping rule, you are linking the analog trunks to the SIP
peer.
To view the mapping rules, go to Gateway > Mapping Rule .
GUI field Description
ID The ID number of the mapping rule. These are sequential and cannot be
modified.
PSTN trunk The name of the analog trunk being mapped to a SIP peer.
SIP peer The name of the SIP trunk being mapped to the PSTN trunk.
Status Displays whether the mapping rule is enabled. A check mark means
enabled, an X means disabled.
To add a mapping rule
1. Go to Gateway > Mapping Rule.
2. Click New .
3. Configure the following:
4. Click Create .
Max outgoing
channel Defines how many of the FXO ports available can be used for
outbound calls at one time.
Phone Number Click New to add the phone number provided by your PSTN
service provider. Your PSTN service provider will direct calls from
external callers directly to this number. You can add multiple
numbers.
GUI field Description
Enabled Select to activate the rule.
PSTN trunk Select the analog trunk profile that you want to map to the SIP peer.
SIP peer Select the SIP trunk profile that you want to map to the PSTN trunk.
Comments Enter any comments you have for this mapping rule.