QuickStart Guide
FortiToken-200
B
FortiToken-200B is a small hardware One Time Password (OTP) generator,
aka Token, that fits on a key-chain. Simply press the button and the
FortiToken-200B generates and displays a secure one-time password (OTP)
that you enter along with your regular password for secure authentication and
access to critical applications and sensitive data.
The time remaining is shown on a
circular time
in 10-second increments.
After the 60 seconds is up, the password expires and the FortiToken display
turns off.
Step 1. Unpacking
Open the shipping carton and carefully unpack its contents. The carton should contain the following items:
•
FortiToken-200
B
units
•
FortiToken-200
B
QuickStart Guide (QSG)
If any item is found missing or damaged, please contact your local reseller for replacement.
Package Contents:
Step 2. Activating the FortiToken unit
Before you can successfully use the FortiToken-200
B
token generator, it must be activated on the FortiGate
or FortiAuthenticator
system.
The following requirements must be met before you can do this:
•
The FortiGate
or FortiAuthenticator
unit system time must be configured to synchronize with a Network Time
Protocol (NTP) server.
Note that with FortiOS, FortiToken identifiers must be entered into the FortiGate unit, which
then contacts FortiGuard servers to verify the information before activating them.
•
FortiAuthenticator on the other hand acts as a repository for all FortiToken devices used on your network. It is
a single point of registration and synchronization for easier installation and maintenance
•
The FortiGate
or FortiAuthenticator
unit must be able to access the FortiGuard Distribution Network (FDN).
To activate one or more FortiToken units
with your FortiGate unit.
1.
Log in to the web-based manager of your FortiGate unit
.
2.
Go to
User > FortiToken > FortiToken.
Select
Create New.
Then add the serial numbers for each FortiToken unit you have and select
OK
.
3.
Each FortiToken unit will automatically activate. The
Status
field will indicate
Activating
. Select
Refresh
, and you should see the
Status
field
changed to
Active
.
4.
Select the check box for the activated FortiToken unit, then on the toolbar select
Synchronization
. The Synchronize FortiToken dialog box
appears.
5.
Press the
Start
button of your FortiToken unit and enter the 6-digit token password in the
First Code
field. Wait until the
FortiToken time expires, then press the
Start
button again to generate a second password and enter it into the
Next Code
field. Select
OK
.
