Fortinet FortiTester 2000E, Быстрый старт

Страница: 9 / 20

9
To install the transceivers
1. Ensure that you are properly grounded. .
2. Remove the caps from the cage sockets on the front
panel of the unit..
3. Position the transceiver in front of the cage socket
opening and ensure that the transceiver is correctly
oriented. When the transceiver is correc
ectly oriented, the
extraction lever will be level with the socket latch.
Note: Cage socket orientation may vary. Ensure that the
transceiver module is correctly oriented each time that
you are inser ting a transceiver.
Caution:
Transceivers are
static sensitive
devices. Use
an ESD wrist
strap or similar
grounding device
when handling
transceivers.
Do not install
or remove
transceivers while
fi ber-optic cables
are still attached.
This can cause
damage to the
cables, cable
connectors,
and the optical
interfaces. It may
also prevent the
transceiver from
latching correctly
into the socket
connector.
Note: Installing
and removing
transceivers can
shorten their
useful life. Do not
install or remove
transceivers more
than is necessary.
.
SFP+
Transceivers
SFP Cage Sockets
Socket Latch
Transmit Optical Bore
Extraction Lever
Receive Optical Bore