Fortinet FIM-7904E, Руководство пользователя

Страница: 7 / 27

FIM-7904E interface module Supported transceivers and breakout cables
(MGMT1 to MGMT4), and a USB port. The USB port can be used with any USB key for backing up and restoring
configuration files.
Connector Type Speed Protocol Description
USB USB 3.0
Type A USB 3.0
USB 2.0 Standard USB connector.
B1 to B8 QSFP+ 40Gbps/10Gbps Ethernet 40GbE connections using 40GBASE-SR/LR
Transceivers or 4x10GbE connections using
breakout cables.
M1 and M2 SFP+ 10Gbps/1Gbps Ethernet 10GbE connection (using SFP transceiver). For
heartbeat and synchronization between
chassis. 1GbE not recommended.
MGMT1 to
MGMT4 RJ-45 10/100/1000Mbps Ethernet 10/100/1000BASE-T copper connection for
management or system administration.
Supported transceivers and breakout cables
Transceivers available from Fortinet for the FIM-7904E B1 to B8 QSFP+ interfaces.
Transceiver Description
FG-TRAN-QSFP+SR 40GE QSFP+ transceivers, short range.
FG-TRAN-QSFP+LR 40GE QSFP+ transceivers, long range.
Breakout cables available from Fortinet for the FIM-7904E B1 to B8 QSFP+ interfaces.
Breakout Description
FG-TRAN-QSFP-4XSFP 40GE QSFP+ Parallel Breakout Active Optical Cable with 1m length.
FG-TRAN-QSFP-4SFP-5 40GE QSFP+ Parallel Breakout MPO to 4x LC connectors, 5m reach.
Splitting the FIM-7904E B1 to B8 interfaces
Each 40GE interface (B1 to B8) on the FIM-7904Es in slot 1 and slot 2 of a FortiGate-7000 system can be split
into 4x10GBE interfaces. You split these interfaces after the FIM-7904Es are installed in your FortiGate-7000
system and the system us up and running. You can split the interfaces of the FIM-7904Es in slot 1 and slot 2 at
the same time by entering a single CLI command. Splitting the interfaces requires a system reboot so Fortinet
recommends that you split multiple interfaces at the same time according to your requirements to avoid traffic
disruption.
FIM-7904E Interface Module Guide
Fortinet Technologies Inc. 7