Hardware installation
17
7. Push down both power sliders to make sure the module power switch is on.
When the module is fully in position, the power sliders should drop down, lock the levers, and turn module power on.
Gently push both power sliders down to their bottom position to make sure they are fully closed.
Levers locked
Power slider
down to bottom
Power slider
down to bottom
8. If the chassis is powered on, check the modle LEDs to verify that the module is
operating correctly
LED
Normal operation state
Status
Green
Alarm
Off
HA
Off
Power
Green
Shutting down and removing a FIM-7901E module from a chassis
This procedure describes how to shut down and remove a FIM-7901E module from FortiGate-7000 chassis. The
procedure includes photographs to illustrate the procedure steps. The photos were taken in one of Fortinet's hardware
labs using a generic module and FortiGate-7000 chassis.
FIM-7901Es are hot swappable. This procedure is the same whether or not the chassis is powered on.
FIM-7901E Processing Module Guide
Fortinet Technologies Inc.
