Fortinet AP400 Series, Руководство по установке

Страница: 79 / 102

Where to Go From Here 65
3.
Attach the other end of the grounding wire to an appropriate grounding source.
Where to Go From Here
Now that the OAP433e is installed, go to the Meru System Director Getting Started Guide
for instructions on initializing the hardware. Return to this chapter to check the status of the
LEDs once the WLAN is operational.
As well, check the AP chapter in the Fortinet System Director Configuration Guide for instruc-
tions on configuring radio band, dual radio, and external antenna operation.
Equipment shall be installed in accordance with the National Electrical Code ANSI/NFPA 70 and the
Canadian Electrical Code, Part 1, and when applicable, the National Electrical Safety Code, IEEE C2.
Equipment shall be properly grounded according to Chapter 8 of ANSI/NFPA 70, the National Electrical
Code (NEC) and the Cable distribution system should be grounded (earthed) in accordance with ANSI/
NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of the Outer
Conductive Shield of a Coaxial Cable.
The separate protective earthing terminal provided on this product shall be permanently connected to
earth.