Example FortiGate Voice branch office configuration
Configuring the FortiGate Voice PSTN and PBX settings
FortiGate Voice Version 4.0 Administration Guide
01-400-112851-20100127
21
•
• The first rule requires branch office phones dial 9 to connect to phone numbers on the
PSTN. This dial plan must also strip the first digit (the 9) from the dialed number.
• The second rule allows branch office phones to dial head office extensions directly.
The dial plan rule sends calls starting with 1 to the VoIP provider where they are routed
to the head office. This dial plan does not strip any digits because users dial the head
office extension number directly without a prefix.
1
Go to
PBX > Call > Dial Plan
and select
Create New
.
2
Add a name for the new dial plan, for example,
Dial_Plan_1
.
3
Select OK.
4
Select
Create New
to add the dial plan rule for dialing the PSTN.
5
Configure the following settings.
6
Select OK.
7
Select
Create New
to add the dial plan rule for dialing the Head Office.
8
Configure the following settings.
9
Select OK.
To add the extensions that are on the branch office internal network
Use the following steps to add extensions to the FortiGate Voice unit for the IP phones that
are to be connected to the internal network. You add identifying information to each
extension entry. The IP phone must be configured with identifying information that
matches an entry in the extension list in order to get an extension from the FortiGate Voice
unit. Extension numbers are independent of the IP address of the IP phone.
1
Go to
PBX > Extension > Extension
and select
Create New
.
2
Configure the following settings to add extension 6001.
Name
PSTN_Dial_Rule
Pattern
_9X.
•
_ indicates this a pattern
•
9 indicates the number must start with a 9.
•
X indicates any number can be included
•
. indicates one or more numbers can be included
Strip
1
Remove the first digit from the number (in this case remove the
leading 9).
Outgoing
Move
PSTN - fxo1
to the
Selected
list to send calls to the PSTN
out the fxo1 interface.
Name
Head_Office_Dial_Rule
Pattern
_1XXX
•
_ indicates this is a pattern
•
1 indicates the number must start with a 1.
•
XXX indicates the number must have three numbers following
the 1.
Strip
0
Do not remove any digits from the number.
Outgoing
Move
VoIP - VoIP_Provider_1
to the
Selected
list to send calls to
the PSTN out the fxo1 interface.
Содержание Voice
Страница 49: ...www fortinet com ...
Страница 50: ...www fortinet com ...
