Ambient Light Sensor
14
5.
Ambient Light Sensor
The scope of delivery includes the ambient light sensor and the ALS cable. In order to be able to use the Ambient Light Sensor, two
work steps have to be carried out.
The first step is to connect the cable to the ambient light sensor. When installing the ALS cable, make sure that it is installed the right
way round. Furthermore, the cable must first be threaded into the housing with the “noses”, now press the connector down and clip it
in. Here are two pictures for a better understanding.
In the second step, the cable must be connected to the monitor.
The ALS cable is mounted on the monitor via a connection socket.
Important, the plug only fits in one direction, please note.
If the monitor is switched on, the ALS function is active. The ambient light sensor is to be mounted using the screw connection point
on the circuit board.
