19
If the machine is to be stored in temperatures below 0ºC
(32 F), it must be drained from all fluids (water, detergent)
using valves no. 12, 13 and 14. Then, all the water must be
pumped out from the water system, by entering the mainte-
nance mode by pressing the Maintenance mode button that
occurs for several seconds in the upper part of the display
when the machine is started.
Clean the machine if dirty. By cleaning the machine each
time after you finish your work, you will keep it in very good
technical condition for a long time.
Leave the machine in dry, warm area that is free from dust.
Afterwards, by pressing the button marked with orange ar-
row, the water pump will be run for 5 seconds pumping out
any remaining water from the water system into the boiler.
Repeat this procedure several times, watching if any water
is still present in the tube that supplies water into the wa-
ter filter, and in the filter itself. If you cannot see any water
coming out, do not start water pump any more to avoid dry
running.
The last step is to remove the water from the water filter by
unscrewing its plastic dome and draining the rest of water.
When dry, re-install the dome on the water filter.
6
7
8
9
10
Maintenance mode
starting button
