background image

30

Lamborghini burner error codes 

and ways they are indicated

If the burner is in the blocked mode, it will be indicated by non-flashing red colour 

of the LED at the back-lit button on top of the burner. By pressing transparent 
button on top of the burner for a short time only, the entire burner start, oper-
ation and self-diagnosis control process is skipped. By pressing this transparent 
button and holding it depressed for at least 3 seconds, the burner start and diag-

nosis control process is commenced (the red light will flash fast). The Table below 

explains some possible burner blockage cases, depending on error occurrence in 
the burner start and self-diagnostics procedure. This information is available by 

counting the number of flashes of the red LED (always the red one). The diagno

-

sis function can be discontinued by pressing the button on burner enclosure and 
holding it depressed for at least 3 seconds.

MACHINE STATUS INDICATOR

Condition

LED colour

Standby mode, other intermediary 
modes

No light

Fuel heating in the burner starting 
phase, waiting time max. 5 seconds

Yellow

Fuel / air mixture ignition stage

Yellow, flashing

Proper operation

Green

Improper operation, the infrared sen-

sor cannot see any flame

Green, flashing

Voltage drop

Yellow / red, flashing alternately

Burner blocked

Red

Error

Red, flashing

Scattered light on the sensor prior to 
mixture ignition

Green / red, flashing alternately

Self-diagnostics

Red, quick flashing

Содержание Fortador PRO S









































Отзывы: