Contents
The Smart PIR is supplied with required batteries,
mounting bracket and mount pack.
General
Our products are designed to comply with the
recommended codes and practice, and is to be
installed and serviced by competent persons in
accordance with the relevant regulations.
Smart Security PIR’s
ECSPPIR
ECSPPET
Products bearing this mark
are compatible with the Cli APP
First Use
Find the screw on the bottom of the PIR.
Undo the screw and open the front part of the casing.
• Insert the batteries, with the correct polarity.
• Once the batteries are inserted, the detectors will start its
self-test procedure for 30 seconds.
• After self detection has completed, complete configuration.
Installation
Fix the bracket on the wall, with screws and attach the detector to the bracket. Adjust the bracket to
change thedetection distance and angle. It is recommended to mount the detector 2m from the ground.
Avoid mounting the detector close to windows, AC units, heater(s), refrigerator(s), oven(s), sunshine,
and places where there are severe changes in temperature, or where the air stream flows frequently.
If two detectors are installed in the same detection area, adjust the location to avoid interference,
and false alarms.
PIR detectors are more sensitive to horizontal movements, than vertical.
ECSPPET includes Pet immunity up to ≤ 25kgs
1. Detection window
2. LED indicator
3. Bracket
Top view
Side view
