50
Programming and control
4.6.5
Function keys
The hand terminal has two freely programmable function keys
and
. You define which
functionality or which menu will be called up when the respective function key is pressed.
You define the function keys as follows:
1. Navigate via
> Device data
to the
Function keys
sub-menu.
2. Use
or
to go to the desired function, for example
Start mixer
.
3. Confirm with
4. Choose
or
to choose the symbol of the function key to which the assignment is to
be made.
4.1.
The list symbol stands for the key
.
Note:
This key is assigned the animal list by default.
4.2.
The hash symbol stands for the key
.
4.3.
The hyphen [
-
] in the selection box is used to remove an assignment.
4.6.6
Animal list
In the
Animal list
menu you can list the calves in a table sorted by parameters. The table is
sorted in ascending order by the first column of the first parameter. This means that the calf with
the greatest need for monitoring is at the very top of the table. The following parameters can be
displayed:
•
Feed consumption as a percentage
•
Feed consumption in liters (today or yesterday)
•
Drinking speed as a percentage
•
Animal visits
•
Break-offs
Note:
You can also access the
animal list
directly via the key
.
Default value:
16 sec.
Permitted range of values:
10 to 60 sec
column 1 column 2
Содержание TAP5-VS2-50
Страница 121: ...Appendix 121 10 4 Standard feeding plans ...
Страница 122: ...122 Appendix ...
Страница 129: ...Index 129 Unknown transmitter 101 Water connection 12 Water pressure 24 Weight 12 ...
