Förster-Technik TAP5-CH2-25, Оригинальная инструкция по эксплуатации

Страница: 74 / 131

74 Running the automatic feeder
7. In Feed , you can check the feed quantity to which the calf is entitled for the defined period.
After the validity period, your corrections expire and the calf is fed according to the feeding plan
of its group again.
6.5.5.3 Feed concentration
You change the feed concentration of an individual calf as follows:
•
Choose > Feeding > Animal to go to the Conc. submenu.
•
Choose to select the desired animal number.
•
In Deviation , enter the number of days (validity period) on which the calf is to receive a
modified feed concentration. You can enter values between 0 and 99. The default setting is
0 days.
•
In Quantity , you enter the desired change in concentration. You can enter values between
0 g/l and 255 g/l. Use the ( +/- ) key to enter a minus sign (-) in front of the number, for ex-
ample -10 g/l, in order to reduce the concentration and a plus sign (+), for e10 g/
l, to increase the concentration. The default setting is 0 g/l.
•
In Plan , you can check the feed concentration to which the calf is entitled according to the
plan.
•
In Concentration , you can check the feed concentration to which the calf is entitled after
the change.
After the validity period, your corrections expire and the calf is fed according to the feeding plan
of its group again.
6.5.5.4 Shortening or lengthening total feeding duration
You can shorten or lengthen the total feeding duration for a calf. To do this, you must "push"
the animal to the desired plan day.