Forney 210 MIG, Руководство пользователя

Страница: 11 / 28

11 WWW.FORNEYIND.COM
• Unpack the welder.
• Assemble the plastic top handle using the screws provided.
• Plug the torch hose into the socket on the front of the welder.
• Attach the gas hose and the electrical connector.
Standard Gun or Torch Lead
Spool Gun
The bottle (not supplied) should be located at the rear of the welder, securely held in position by
the chain provided. For safety, and economy, ensure that the regulator is fully closed, (turned
counterclockwise) when not welding and when fitting or removing the gas cylinder.
• Turn the regulator adjustment knob counterclockwise to ensure the valve is fully closed.
• Screw the gas regulator fully down on the gas bottle valve, and fully tighten.
• Connect the gas hose to the regulator securing with clip/nut provided.
• Open the cylinder valve, then set the gas flow to approx. 20-30 CFH on the regulator.
• Operate the torch trigger to ensure that the gas is flowing through the torch.
WARNING: Cylinders are highly pressurized. Handle with care. Serious accidents
can result from improper handling or misuse of compressed gas cylinders. Do not
drop the cylinder, knock it over, expose it to excessive heat, flames or sparks. Do not
strike it against other cylinders.
Assembly
Torch Lead and Spool Gun Assembly
Gas Cylinder and Regulator Connection