Formosa Industrial Computing 3A-100 Series, Руководство пользователя

Страница: 8 / 62

4
Chapter 2: Getting Started
2.1 General Description
3A-100 SERIES is a plug and play network DVR system. The minimum PC system requirements for browsing and
configuration are described in section 1.2.
As 3A-100 SERIES transmit and record video/ audio data th rough Internet, Intranet, PSTN/ISDN, users also can operate
3A-100 SERIES via IR remote control.
For Network Mode
For network mode, SERIES connects to a local area network or a network device by an Ethernet cable via the RJ- 3A-100
45 port. Via Internet browser operation, users can view/ play back the recorded data. For network mode, there is a new
function called “Multi-homed”. This feature enable users to dial up to
SERIES with modem and thus users can 3A-100
use browser to access SERIES directly. 3A-100
To get 3A-100 SERIES up and running, you have to set the IP of 3A-100 SERIES under network ope ration, please refer to chapter 3 for the configuration and usage.
For local IR remote control and keyboard operation
For local monitoring, Operating SERIES via IR re 3A-100 mote control, connect SERIES “VGA Out” of the 3A-100
VGA monitor and thus users can configure 3A-100 SERIES via IR remote control, and then view local video and remote
video from the other SERIES all over the world at the same time. 3A-100
We strongly suggest users to configure the system via IR remote control. Please refer to chapter 4 for setup procedures.
The following sections will introduce the features of SERIES. This informa 3A-100 tion will help users to install 3A-100
SERIES for the first time. Users just follow the step-by step procedures to install your SERIES. 3A-100
2.2 Physical Description
2.3 Make the Physical Connection
2.4 Running Mode of
SERIES 3A-100
2.5 Power on SERIES 3A-100
2.6 Use Dynamic IP address for SERIES 3A-100
2.7 Use SERIES with DSL or Cable Modem 3A-100
2.2 Physical Description
Read the following information to be familiar with 3A-100 SERIES, making particular note of where the connectors and
indicators are located. This information provides a useful reference during the installation of the product into your networking
environment.
awired
com
3