manualshive.com logo in svg

formlabs Form Cure, Руководство пользователя

Поделиться
Скачать
formlabs Form Cure Скачать руководство пользователя страница 16

16

4. 

Preparation and Setup

Consider the weight and dimension of the product for installation.

4.1 

Arranging the Workspace

For best results:
1.  Choose a stable, level workspace to install and operate the Form Cure.
2.  Reserve the following minimum dimensions for the most convenient access:

 ° Width: 36 cm (14 in)
 ° Depth: 36 cm (14 in)
 ° Height: 64 cm (25.2 in)
 ° The cover opens upward from the front to allow inserting and removing printed parts 

from the turntable. To fully open, the Form Cure requires an additional clearance of 30 
cm (12 in) above the unit for a total clearance height of 64 cm (25.2 in). The Form Cure 
unit weighs 5.6 kg (12.4 lb).

3.  Allow additional space for accessories, such as the Formlabs SLA printer, Finish Kit, and 

Form Wash.

4.  Ensure either the wall outlet or power supply for the Form Cure is easily accessible. To 

disconnect the equipment from mains electricity and power off the unit, unplug the power 
cable from the wall outlet, or the power supply.

4.2 

Unboxing the Form Cure

The Form Cure ships in a cardboard carton, protected by foam inserts above and below the 
machine. The upper foam insert also contains the accessories. During unboxing, inspect the 
Form Cure for any damage or missing items. In the case of damage or missing items, contact 
Formlabs or the certified service provider.
To unbox the Form Cure:
1.  Open the box from the top.
2.  Lift and remove the foam insert containing the power supply.
3.  Lift the Form Cure out of the box.
4.  Remove the turntable, located at the bottom of the box.

Remove all packaging material before connecting power. Retain all packaging and 
inserts for warranty service.

4.3 

Installing the Form Cure

To install the Form Cure:
1.  Find a clean, level surface with a nearby power source.
2.  Remove the thin plastic wrapper from the Form Cure exterior.
3.  Lift the cover.
  Insert the turntable on the circular wheel mount at the base of the cure chamber.
  Connect the power cable and external supply to the Form Cure and a power source.

NOTICE

NOTICE

4
5

Содержание Form Cure
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды