formlabs Form Cure L, Инструкция по установке и использованию

Страница: 8 / 40

6
1 Preface
Congratulations on purchasing the Form Cure L. On behalf of the Formlabs team, we thank
you for your purchase.
The Form Cure L is a large-format stereolithography (SLA) post-cure chamber. Post-curing
printed parts in the Form Cure L strengthens them with heat and 375 nm and 405 nm light
and brings them to their optimal mechanical properties. Post-curing is also a required step in
workflows using Formlabs dental or medical resins to make biocompatible parts.
This manual explains how to set up, use, and properly maintain the Form Cure L and provides
design guidance for optimizing print results.
The manual is intended for anyone who is installing, operating, maintaining, or otherwise
interacting with the Form Cure L. Supervise young or inexperienced users to ensure enjoyable
and safe operation.
1.1 Read and retain instructions
Read and understand this manual and its safety instructions before using the Form Cure L.
Failure to do so can result in serious injury or death. Keep all safety information and instructions
for future reference and provide them to subsequent users of the product.Follow all instructions
to avoid fire, explosions, electric shocks, or other hazards that may result in damage to property
and/or severe or fatal injuries. The Form Cure L shall only be used by persons who have fully
read and understand the contents of this manual. Ensure that each person who uses the Form
Cure L has read these warnings and instructions and follows them. Formlabs is not liable for
cases of material damage or personal injury caused by incorrect handling or non-compliance
with the safety instructions. In such cases, the warranty will be voided.
1.2 Obtaining documentation and information
Visit formlabs.com to:
• Access your Formlabs store ( formlabs.com/store ) and Dashboard accounts ( formlabs.
com/dashboard ).
• Find authorized resellers in your region ( formlabs.com/company/partners ).
• Access the Terms of Service ( formlabs.com/terms-of-service ) and the Privacy Policy
( formlabs.com/privacy-policy ).
Visit support.formlabs.com to:
• Access the latest version of all Formlabs product documentation.
• Contact Formlabs Support to request documentation, manuals, repair guides, and
technical information.
• Submit any comments and positive or negative feedback. We value comments from our
customers.
• Request additional training.
1.2.1 Support and service
Retain a record of the original purchase to request warranty services. Service options depend
on the status of the specific product’s warranty. Include the serial name of the product when
contacting
Formlabs Support or a certified service provider for product support. For products
purchased from authorized resellers, contact the original service provider for assistance before