5
Introduction Formech FM660
The
Formech FM660
is a compact, manually operated Vacuum Forming Machine that will produce high
definition mouldings in up to 6mm thick material.
The
Formech FM660
incorporates powerful infrared ceramic heaters, which are thermostatically
controlled in concentric zones.
A powerful reverse-blow facility to release the moulding from the tool is integrated into the FM660.
The machine is fitted with an auto-level facility, which detects a droop in the sheet of plastic resulting
from softening during its heat cycle. Air is then blown into the chamber beneath the plastic keeping the
sheet level until it is ready to be formed.
A countdown timer is fitted as standard.
The machine has been designed to be highly adaptable and functions such as changing a mould, or
fitting reducing windows (which allow smaller sheets to be used) can be carried out in the minimum
amount of time.
The powered table version of this machine allows easy and safe use of heavy moulds.
The FM660 is ideal for prototype development work whilst also quite capable of small and large
production runs.
This manual informs the user on machine assembly, operation and service. It also provides an
introduction into vacuum forming with some useful advise on mould making and post forming
processes. If you would like a more comprehensive guide to the vacuum forming process then please
visit the support section of the Formech web page. A
Training Manual
is provided in a download and
printable format.
