Formech 508DT, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 30

Page 6
508FS only
The triangular supports and the connecting
crossbar at the rear of the machine need to
be assembled before being attached to the
rear of the main body of the machine.
The triangular supports are interchangeable
between the left and right hand side. The
white crossbar needs to be bolted to the
supports from the underneath and then
the four bolts tightened to create a rigid
framework. This is then bolted to the rear of
the main body using four off M6 cap head
screws.