Formech 508DT, Инструкция по установке, эксплуатации и обслуживанию

Страница: 19 / 30

Page 19
Operating procedures
BASIC OPERATION (Cont.)
31) ‘MAIN’ brings you back to the main menu, with the
same recipe loaded in the memory. 32) ‘SAVE TIMES JUST USED’ will bring you to the ‘TIME
SETTINGS’ screen
33) ‘TIME SETTINGS’ screen
If the material was ready before the end of the heating
cycle, the PLC will record the new heating time, allowing
you to save it.
34) You can at this stage change the other heating zone
settings if time settings.
36) If you wish to repeat a job you have done in the past,
you can load the recipe, by pressing ‘LOAD’ on the main
menu and then press ‘RUN’.