47
Chapter 3 Advanced Operation
Example: When performing letter fold on 300.0 mm/11.81 inches length paper
1
Touch the
key on the [Ready] screen —> Touch [STD Fold for Non-STD Size].
2
Using the numeric keypad, enter the paper length [300] —> Touch the
key.
3
Touch the
key.
Return to the [Ready] screen.
3. Custom Folding
<Standard single fold>
<Example of custom single fold>
Custom folding is an operation method to fold paper
at any position by specifying the folding stopper
positions (folding position) of the folding plates 1
and 2.
Length : 182.0 to 457.2 mm/
7.17 to 18.00 inches
Width :
120.0 to 311.0 mm/
4.73 to 12.24 inches
Paper feed
direction
The foldable sizes are as follows. (width x length)
Maximum: 311.0 x 457.2 mm/12.24 x 18.00 inches
Minimum: 120.0 x 182.0 mm/4.73 x 7.17 inches
The paper sizes which can be used may vary with the paper type, thickness, and printing state.
[a]
The length of the folded plane [a] which can be
folded by the folding plates 1 and 2 is restricted.
Folding plate 1: 42.0 to 325.0 mm/1.65 to 12.80
inches
Folding plate 2: 0.0 (*)/47.0 to 217.0 mm
/0.0 (*)/1.85 to 8.54 inches
(*) As the folding plate 2 is not used in single
folding, it is 0.0 mm/0.0 inches.
Incorrectly measuring the paper length or setting the folding stopper position can cause paper
jamming inside the folding plate.
