33
Chapter 2 Basic Operation
3. Standard Folding of Standard Paper
Method to fold standard paper by setting a mode among standard folding modes displayed on the control
panel.
For the standard paper sizes, refer to Chapter 1 “6. Paper Types and Sizes” (p.26).
Six standard folding modes are available as shown below.
Paper feed direction
Ejection
direction
Single
fold
Double
fold
Irregular
accordion fold-out
Letter
fold
Accordion-
fold
Gate fold
Depending on the thickness of paper, this machine may not be able to process some standard sheets of
paper.
Do not put fingers inside during operation.
Keep away long hair, ties, jewelry and loose clothing.
It could cause injury.
Automatic detection of standard paper size
When paper for all paper sizes is stacked in the
machine direction shown in the figure, paper
is detected as standard paper.
When paper of standard paper size is
stacked on the paper feed tray in the
sideways, the paper size is detected as
wrong paper size. Use paper as non-
standard paper when stacking paper in the
sideways.
For the use of non-standard paper, refer to
