Formax Cut-True 29H, Руководство оператора

Страница: 26 / 62

Page
26
/
62
7. USING THE CUTTER
7.1 Danger zones in the cutter
• knife and clamp zone
• back side of the cutter frame (access to clamp zone and knife)
• back side of the cutter (access to the back gauge)
• bottom side of the rear table access to the back gauge zone (spindle and slider)
7.3 Starting the cutter
7.3.1 Powering on
3
Figure 15. Arrangement of the elements used when switching on the cutter.
1. Set the main switch 1 to "ON" 1 position (Fig. 15)
2. Press the green button 2 (Fig.15)
- green LED 3 on the program unit 6 display lights up (fig.15)
- the green OSSD 1 LED lights up (Fig.11) in the receiver 4 (Fig.15)