EN © 2022 FOREVER.
All rights reserved.
Car camera
19
•
G
–
Sensor
–
when enabled in the settings menu, this feature automatically
starts video recording when sudden changes in car acceleration are detected.
•
After connecting the camera to a computer using a USB cable (not supplied),
the device allows you to work in two additional modes:
o
Memory mode
–
allows you to use the device with an inserted
memory card as a mass storage device
o
Camera mode
–
allows to use the device as a webcam
MOUNTING
Insert the suction cup holder clip into the camera's bracket mount (2) and move
towards the centre of the device so that the camera cannot detach itself from the
bracket. Lift the lever on the suction cup of the holder and apply the suction cup to the
desired location on the windscreen or other flat and smooth surface in the dashboard
area. Lower the lever to attach the product to the surface.
9. CLEANING AND MAINTENANCE
Regular and proper cleaning and maintenance will ensure a long service life and
trouble
–
free operation of the equipment.
Cleaning and maintenance may only be carried out when the appliance is switched
off.
No part of the device may be submerged in water.
Do not use sharp tools or aggressive cleaning agents, including concentrated
dishwashing liquids, milks and scrubbing pastes, to clean heavy dirt.
The components of the appliance may only be cleaned with a dry cloth, a brush or
paper towel.
In case of heavy soiling, the suction cup of the handle can be wiped with a damp cloth
and then dried.
10. TROUBLESHOOTING
In case of any problems with the device, please refer to the following tips.
The device has no user
–
serviceable parts.
I cannot switch the device
on.
Charge the battery.
Check the car adapter for damage.
The device does not
charge when the power
supply is connected
Check that the power source or its cable is not damaged.
Check that the micro USB connector on the product is not
damaged.
If the included car adapter does not allow charging,
please contact the manufacturer's hotline.
