9
3.0. INSTALLATION GUIDE
7.
Make sure all panels are connected as seen in the illustration below.
Panel A
Opening for coolant lines
Panel B1
Panel C
Panel B2
FIG. 10 – Four panel window kit assembly
Finishing the Installation
1.
Insert the coolant lines into the side of the rubber connector then fit the connector into panel A
making sure the notch is in place.
FIG. 11 – Fitting the coolant lines through the window kit
Connector
Panel A
Coolant lines
Final assemly
2.
Install the assembled kit into the window opening and push the window nearly closed to secure it in
place. Use the nuts to adjust as needed.
FIG. 12 – Installation in sliding window
FIG. 13 – Installation in hung window
