background image

HEAD RESTRAINTS

WARNING

Fully adjust the head restraint before
you sit in or operate your vehicle. This
will help minimize the risk of neck

injury in the event of a collision. Do not
adjust the head restraint when your vehicle
is moving.

Adjusting the Head Restraint

WARNING

Raise the rear head restraint when the
rear seat is occupied by a passenger
or a child restraint.

Adjust the head restraint so that the top of
it is level with the top of your head.

Removing the Head Restraint

Press the locking buttons and remove the
head restraint.

MANUAL SEATS

Adjusting the Lumbar Support

DIESEL PARTICULATE FILTER

During regeneration at low speed or engine
idle, you may smell a hot metallic odor and
could notice a clicking metallic sound. This
is due to the high temperatures reached
during regeneration and is normal.

Changes in the engine or exhaust sound
may be heard during the regeneration
process.

AUTO-START-STOP

Using Start-Stop

To Stop the Engine

1.

Stop your vehicle.

2. Move the transmission selector lever to

neutral.

3. Release the clutch pedal.
4. Release the accelerator pedal.

To Restart the Engine

Press the clutch pedal.

Note:

The transmission must be in neutral.

7

Tourneo Custom/Transit Custom (TTF) Vehicles Built From: 26-06-2014, Vehicles Built Up To: 15-03-2015, EK2J-19G217-AKA (CG3580en) enGBR, Edition date: 04/2014, First Printing

Содержание Transit Custom 2014
















Отзывы: