manualshive.com logo in svg

Ford TRANSIT 2016.75, Руководство по монтажу

Поделиться
Скачать
Ford TRANSIT 2016.75 Скачать руководство пользователя страница 280

5.14 Corrosion Prevention

5.14.1 General

Avoid drilling into closed frame body members to
avoid the risk of corrosion from swarf.

If drilling is required, however:

•

Re-paint metal edges and protect against
corrosion after cutting or drilling operations

•

Endeavor to remove all swarf from inside the
side member and treat to prevent corrosion

•

Apply corrosion protection inside and outside
of the chassis frame

For Welding:

Refer to: 5.1 Body (page 227).

5.14.2 Repairing Damaged Paint

After cutting or reworking any sheet metal on the
vehicle the damaged paint must be repaired.

Ensure all materials are compatible with the
relevant Ford specifications and maintain the
original performance where possible. For
specifications please contact your National Sales
Company representative, or local Ford dealer. If
they are unable to help you then please contact
the Vehicle Converter Advisory Service at
[email protected]

5.14.3 Under Body Protection and

Material

WARNING: Do not over-coat or
contaminate surfaces of components
such as brakes or catalytic converters.

Ensure all materials are compatible with the
relevant Ford specifications and maintain the
original performance where possible.

Some proprietary products affect the original
coatings. For specifications of corrosion protection
materials, please contact your National Sales
Company representative, or local Ford dealer. If
they are unable to help you then please contact
the Vehicle Converter Advisory Service at
[email protected]

5.14.4 Painting Road Wheels

WARNING: Do not paint wheel clamp
surfaces in contact with other wheels,
brake drum or disc, hub and holes or
surface under wheel nuts. Any further
treatment in these areas may affect the
wheel clamp performance and the vehicle
safety. Mask the wheel when changing
the color or repairing paint.

5.14.5 Contact Corrosion

When using different materials with a different
electrochemical potential, ensure that materials
are isolated from each other to prevent contact
corrosion caused by a potential difference.

Use appropriate isolation materials. Where
possible, choose materials with low level of
electrochemical potential difference.

FORD 

TRANSIT

 2016.75

Date of Publication: 03/2018

EU

5 Body and P

aint

280

Содержание TRANSIT 2016.75





































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды