Ford TRANSIT 2016.75, Руководство по монтажу, Страница: 103 / 292

4.3 Charging System
4.3.1 General Information and Specific
Warnings
The Transit electrical system is a 12-Volt supply
with a negative ground return. The factory fit
alternator and battery equipment are designed
for normal operations. The vehicle may have
Standard Flooded, Enhanced Flooded or
Absorbent Glass Mat (AGM) Batteries as factory
fit. Higher capacity batteries are available as
standard production options and special vehicle
options offer AGM technology for heavy PTO and
deep cycling applications. Before installing
additional electrical equipment check that the
battery capacity, technology type, harness load
capability, and alternator output are suitable for
the extra load.
Refer to: 4.4 Battery and Cables (page 110).
Power and Connectivity Usage Recommendations
table.
The battery capacity, technology and charge
available from the alternator must be adequate
to ensure engine cranking in unfavorable climatic
conditions, even after fitment of additional
electrical equipment.
The Transit utilizes multiplexed vehicle
electronics, it is recommended that the
appropriate Ford proprietary accessory systems
are used. Inappropriate or incorrect connection of
additional equipment could cause misoperation,
or damage to the vehicle, and so invalidate any
warranty.
Additional connection points are provided
specifically for customer use, and are located on
the outside of the driver's seat pedestal. A 60Amp
fused connection is provided as standard on
Single Battery Vehicles. 3x 60Amp fused
connections are provided for Twin Battery
vehicles. A further connection is possible for higher
current applications, see 'Battery and Cables'
section for information.
Do not jump-start the vehicle directly from the
battery. Use designated jump-start points. Refer
to the Owner's Manual. The wiper motor bracket
must not be used as a ground as it is isolated
from the body.
Date of Publication: 03/2018
FORD TRANSIT 2016.75
4 El
ec
tric
al
103
EU