will light and stay lit to remind you that the front passenger frontal
airbag is off. See
Front passenger sensing system
in the airbags section
of this chapter.
Front safety belt usage sensors
The front safety belt usage sensors detect whether or not the driver and
front outboard passenger safety belts are fastened. This information
allows your Personal Safety System
娂
to tailor the airbag deployment and
safety belt pretensioner activation depending upon safety belt usage.
Refer to
Safety Belt
section in this chapter.
Front safety belt pretensioners
The safety belt pretensioners are designed to tighten the front outboard
safety belts firmly against the occupant’s body during a collision. This
maximizes the effectiveness of the safety belts and helps properly
position the occupant relative to the airbag to improve protection. The
safety belt pretensioners can be either activated alone or, if the collision
is of sufficient severity, together with the airbags.
Front safety belt energy management retractors
The front outboard safety belt energy management retractors allow
webbing to be pulled out of the retractor in a gradual and controlled
manner in response to the occupant’s forward momentum. This helps
reduce the risk of force-related injuries to the occupant’s chest by
limiting the load on the occupant. Refer to
Safety Belt
section in this
chapter.
Determining if the Personal Safety System
姟
is operational
The Personal Safety System
娂
uses a warning light in the instrument
cluster or a back-up tone to indicate the condition of the system. Refer
to the
Warning lights and chimes
section in the
Instrument Cluster
chapter. Routine maintenance of the Personal Safety System
娂
is not
required.
The Restraints Control Module (RCM) monitors its own internal circuits
and the circuits for the airbag supplemental restraints, crash sensor(s),
safety belt pretensioners, front safety belt buckle sensors, and the driver
seat position sensor. In addition, the RCM also monitors the restraints
warning light in the instrument cluster. A difficulty with the system is
indicated by one or more of the following.
•
The warning light will either flash or stay lit.
•
The warning light will not illuminate immediately after ignition is
turned on.
2006 Taurus
(tau)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
83