Type 2
Select position
B
on the lighting controls
to switch the parking lamps on. The
parking lamps operate with the ignition on
or off.
E211866
Move the lever up or down to switch on the
desired parking lamp.
Headlamp Low and High Beam
Push the lever away from you to switch
the high beam on.
Headlamp Flasher
Slightly pull the lever toward you and
release it to flash the headlamps.
AUTOLAMPS
WARNING
The autolamps switch position may
not activate the headlamps in all low
visibility conditions, such as daytime
fog. Always ensure that your headlamps
are switched to auto or on, as appropriate,
during all low visibility conditions. Failure
to do so may result in a crash.
Type 1
E139256
Type 2
E142451
When the lighting control is in the
autolamps position, the headlamps
automatically turn on in low light situations
or when the wipers turn on.
If equipped, the following also activate
when the lighting control is in the
autolamps position and you switch them
on in the information display:
•
Configurable daytime running lamps.
•
Automatic high beam control.
•
Adaptive headlamp control.
The headlamps remain on for a period of
time after you switch the ignition off. Use
the information display controls to adjust
the period of time that the headlamps
remain on. See
48
Ranger (), EB3B-19G219-ZAB enAUS
Lighting
Содержание RANGER
Страница 1: ...FORD RANGER Owner s Manual ...
Страница 191: ...Passenger Compartment Fuse Box Type 1 E133602 189 Ranger EB3B 19G219 ZAB enAUS Fuses ...
Страница 428: ...426 Ranger EB3B 19G219 ZAB enAUS ...
Страница 439: ......