When a child restraint system is not being
used, either remove it and store it in a safe
place, or make sure it is properly secured.
An unsecured child restraint system can
be thrown around the vehicle in a collision
or sudden stop and injure someone.
CHILD RESTRAINT ANCHORAGE
LOCATIONS
Upper (top tether) anchorages - Double
Cab
WARNING
WARNING:
child restraint
anchorages are designed to
withstand only those loads imposed
by correctly fitted child restraints. Under
no circumstances are they to be used for
adult seatbelts, harnesses or for attaching
other items or equipment to the vehicle.
There are two child restraint anchorage
points on the rear panel of the Double Cab,
one behind each outboard seating position
in the locations shown below. Do not fit a
child restraint to the centre rear seat.
E136844
1.
Pull the release strap upwards and
move the seat back forwards. (When
returning the seat back to the upright
position, make sure it is securely
latched by attempting to move it back
and forth).
2. Remove the two small rectangular
cutouts from the rear cloth trim to
reveal the two child restraint anchor
points (a hole with an internal screw
thread).
1
2
E131744
Installation of a child restraint anchor
fitting – Double Cab
The following illustration shows how to
install anchor fittings to the anchorage
points. Child restraint anchor fittings
conforming to Australian Standard
AS1754-2004 (or later) can be purchased
from child restraint manufacturers or
suppliers.
The anchorage components must be
selected and assembled as shown in the
illustration.
16
Ranger (), EB3B-19G219-ZAB enAUS
Child Safety
Содержание RANGER
Страница 1: ...FORD RANGER Owner s Manual ...
Страница 191: ...Passenger Compartment Fuse Box Type 1 E133602 189 Ranger EB3B 19G219 ZAB enAUS Fuses ...
Страница 428: ...426 Ranger EB3B 19G219 ZAB enAUS ...
Страница 439: ......