The system illuminates the warning lamp
at different pressures for the front and rear
tires.
The tires need to be periodically rotated
to provide consistent performance and
maximum tire life, the system needs to
know when the tires have been rotated to
determine which set of tires are on the
front and rear axles. With this information,
the system can detect and correctly warn
of low tire pressures.
Carrying Out the System Reset
Procedure
1.
Switch the ignition on.
2. Using the information display control,
navigate to tire pressure reset. See
3. Press and hold the OK button until
confirmation appears.
To reset the tire pressure monitoring system, scroll to:
Description and Action
Message
Press the
OK
button.
Settings
Press the
OK
button.
Driver assist
Press and hold the
OK
button until confirmation appears.
Alternatively, if your vehicle has a tire pressure monitoring
system reset button, press and hold the button until
confirmation appears.
Tire Monitor
CHANGING A ROAD WHEEL
WARNINGS
The use of tire sealant may damage
your tire pressure monitoring system
and should only be used in roadside
emergencies. If you must use a sealant, the
Ford Tire Mobility Kit sealant should be
used. The tire pressure monitoring system
sensor and valve stem on the wheel must
be replaced by an authorized dealer after
use of the sealant.
pressure monitor sensor becomes
damaged, it will no longer function.
Note:
The tire pressure monitoring system
indicator light will illuminate when the spare
tire is in use. To restore the full function of
the monitoring system, all road wheels
equipped with tire pressure monitoring
sensors must be mounted on the vehicle.
If you get a flat tire while driving, do not
apply the brake heavily. Instead, gradually
decrease your speed. Hold the steering
wheel firmly and slowly move to a safe
place on the side of the road.
Have a flat serviced by an authorized
dealer in order to prevent damage to the
tire pressure monitoring system sensors.
See
Tire Pressure Monitoring System
(page 186). Replace the spare tire with a
road tire as soon as possible. During
repairing or replacing of the flat tire, have
the authorized dealer inspect the tire
pressure monitoring system sensor for
damage.
190
Mustang (CZG, CZY) Vehicles Built From: 02-05-2016, HR3J 19A321 AKA enGBR, First Printing
Wheels and Tires
Содержание Mustang 2017
Страница 1: ...Owner s Manual ...
Страница 2: ...May 2016 First Printing HR3J 19A321 AKA ...
Страница 4: ......
Страница 314: ...310 Mustang CZG CZY Vehicles Built From 02 05 2016 HR3J 19A321 AKA enGBR First Printing ...