FWL-1003
EN
Copyright © 2015
P á g i n a
|
2
www.Ford-tools.com
LED LIGHT 2X20W ON TRIPOD
FWL-1003
1
APPLICATION
Outdoor or indoor usage such as jobsite, garden, studio and workshop.
It is not designed for commercial use.
WARNING! Please read and understand this operating manual before
use and keep it for your future reference. Your light should only be
passed on together with these instructions.
2
SYMBOLS
The following symbols are used in this manual and/or on the machine:
In accordance with essential requirements of the European
directive(s)
Read manual before use
3
GENERAL SAFETY
Read all safety warnings and instructions. Failure to heed warnings and follow the
Instructions may result In damage to the light, property damage, electric shock,
fire and/or serious injury. Keep safety warnings and instruction for future
reference.
3.1 Electrical Safety
Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not Use any adapter plugs with earthed (grounded) power tools.
Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
When used outdoors, basic safety precautions should always be followed to reduce
the risk of fire, electrical shock and personal injury, including the following:
Use only three wire outdoor cords that have three prong grounding plugs and
grounding receptacles that accept the appliances plug.
If used while exposed to wet or damp surfaces a ground fault outlet (GFCI)
should always be used. I Do not remove the ground wire or grounded plug
from the fixture. Always us a U.L three wire grounded cord with electrical
capacity to properly handle the light and other tools you might be using.
When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
