FCS-15129-12
2012 Fusion MKZ Hybrid Emergency Response Guide 08/2011
7
HYBRID COMPONENT LOCATION AND IDENTIFICATION - CONTINUED
COMPONENT
LOCATION / DESCRIPTION
FUNCTION
1
High-Voltage
• Located behind the rear
Provides means to disconnect
Service Disconnect
seatback.
high-voltage battery for safely
servicing vehicle.
• Orange rectangle with a molded
plastic handle, about 100 mm
(4 in) in length.
2
High-Voltage Battery
• Located behind the rear
Provides high-voltage storage
Approximately 300
seatback. for vehicle’s electric motor.
Volts DC
• Sealed nickel-metal hydride.
3
High-Voltage Wiring
• Runs along the vehicle’s
Provides physical connection
floorpan from the high-voltage
between High-Voltage battery
battery to the Electronically and vehicle’s High-Voltage
Controlled Continuously equipment.
Variable Transaxle (ECVT),
to the DC-to-DC converter,
then the electric A/C unit.
• All high-voltage wiring has
orange-colored insulation.
4
12-Volt Battery
• Located under the hood on the
Provides 12-volts for vehicle
driver side of the vehicle.
accessories.
• Typical automotive 6-cell
lead/acid design.
5
Electronically
• Transverse-mounted design,
Provides rotational force to
Controlled
similar to the non-Hybrid
wheels for vehicle propulsion,
Continuously
Fusion MKZ vehicles.
generates electricity to
Variable Transaxle
recharge batteries during
(ECVT)
• Contains the traction motor,
operation and contains some
generator motor and hybrid
electronics.
electronics.
6
DC/DC Converter
• Located under the hood on
Provides 12 volts to charge
the passenger side, forward
the 12-volt battery and
of the strut tower.
run vehicle accessories.
• It has orange high voltage wires
and Motor Electronics Cooling
System hoses attached to it.
7
Electric A/C
• Located in front of
Provides electric A/C operation;
Compressor
the engine. replaces the belt driven A/C
• It has an orange high voltage
compressor.
wire attached to it using an
interlock connector.
